Obtaining Granules from Waste Tannery Shavings and Mineral Additives by Wet Pulp Granulation

This paper presents the results of research on the granulation process of leather industry waste, i.e., tanning shavings. It is economically justified to granulate this waste together with mineral additives that are useful in the processes of their further processing. Unfortunately, the granulation of raw, unsorted shavings does not obtain desired results due to their unusual properties. In this study, the possibilities of agglomeration of this waste were examined by a new method consisting of the production and then the granulation of wet pulp. During granulation, no additional binding liquid is added to the granulated bed. As part of this work, the specific surface of granulated shavings, the granulometric composition of the obtained agglomerates, and their strength parameters were determined. The use of a vibrating disc granulator, the addition of a water glass solution (in the pulp), dolomite, and gypsum made it possible to obtain durable, mechanically stable granules.