Maskless Device Fabrication and Laser-Induced Doping in MoS₂ Field Effect Transistors Using a Thermally Activated...

We present a novel maskless device fabrication technique for rapid prototyping of two-dimensional (2D)-based electronic materials. The technique is based on a thermally activated and self-developed cyclic polyphthalaldehyde (c-PPA) resist using a commercial Raman system and 532 nm laser illumination. Following the successful customization of electrodes to form field effect transistors based on MoS₂ monolayers, the laser-induced electronic doping of areas beneath the metal contacts that were exposed during lithography was investigated using both surface potential mapping and device characterization. An effective change in the doping level was introduced depending on the laser intensity, i.e., low laser powers resulted in p-doping, while high laser powers resulted in n-doping. Fabricated devices present a low contact resistance down to 10 kΩ·μm at a back-gate voltage of V_G = 80 V, which is attributed to the laser-induced n-type doping at the metal contact regions.