Related Experiment Video
Updated: Nov 20, 2025
An Intramedullary Locking Nail for Standardized Fixation of Femur Osteotomies to Analyze Normal and Defective Bone Healing in Mice
Published on: November 13, 2016
Biomechanical evaluation of naviculocuneiform fixation with lag screw and locking plates
Henry Kuestermann1, Sarah Ettinger1, Daiwei Yao1
1Diakovere Annastift - Orthopedic Department of the Hannover Medical School (MHH), Anna-von-Borries-Straße 1-7, 30625 Hannover, Germany.
Background:
There have been no biomechanical evaluations of naviculocuneiform (NC) joint fixation. This study compared biomechanically 3 different fixation constructs for NC-1-3 joint fixation.
Methods:
The present study compared the three fixation constructs lag screw with locking plate for each NC joint, two crossed lag screws for each NC joint and a separate lag screw for each NC joint with bridging locking plates. NC-1-3 fixation was performed stepwise, and rotation of each joint was evaluated after the application of each lag screw or locking plate and their removal.
Results:
All examined fixation techniques led to a significant reduced rotation of the NC joints. For NC-1 rotation decreased from 2.8° (Range 1.2-6.6°) to 0.6° (0.2-3.0°) for lag screw and locking plate (p = 0.002) and from 5.0° (1.7-9.8°) to 1.0° (0.1-3.6°) for crossed lag screws (p = 0.002). For NC-2, locking plate constructs were better with 0.2° (0.1-0.5°) compared to crossed lag screw osteosynthesis with 0.9° (0.2-1.6°) (p = 0.011).
Conclusion:
Each evaluated fixation technique led to a reduced NC joint rotation. The fixation of any NC joint had no relevant effect on the adjacent NC joints. The results might support surgeons treating NC joint disorders.
