Assembly and Electroluminescence of Sheet-Like Zinc Oxide/Silicon Light-Emitting Diode by Radio Frequency Magnetron...

Sheet-like Zinc Oxide/Silicon ([ZnO]/[Si]) light emitting diode (LED) has been fabricated through depositing nanoscale ZnO on the p-type single crystal silicon by using a radio frequency (RF) magnetron sputtering method. The (100), (002) and (101) diffraction peaks can be observed. With the increasing sputtering time, however, the intensity of (100) and (101) diffraction peaks has gradually decreased and the intensity of (002) diffraction peak has gradually enhanced. Through low the sputtering power, the obtained ZnO shows better (002)-orientation growth. Electroluminescence (EL) from [ZnO]/[Si] LED have been decomposed into three emission bands, i.e., UV, green and orange emissions, which origin from the band gap, zinc interstitial or vacancies oxygen and shallow level, respectively. At the low sputtering power, orange emission is disappeared. It is indicated that the structures and EL properties are sensitive to the fabrication conditions. It is important to optimize and tune the fabrication condition for purposeful application in the future works.