Improvement of Indirect X-ray Detector Performance by Applying Additive Solvent to the Organic Active-Layer

In this paper, we studied how the sensitivity of an indirect X-ray detector was changed by adding the additive solvent DIO to the organic active-layers, such as P3HT:PCBM and PBDB-T:PCBM. The crystallinity and absorbance of the active-layer films were compared with different additive DIO contents. In both active-layers, the highest crystallinity and absorbance were obtained when 3 v% of the DIO was mixed with the active-layer solution. At the same mixing condition of the DIO, the highest sensitivity, of 1.17 mA/Gy · cm₂, was obtained for the P3HT:PCBM detector, and the highest sensitivity, 1.87 mA/Gy · cm₂, was obtained for the PBDB-T:PCBM detector. Compared to the detector without the DIO, the sensitivities of the detectors with the P3HT:PCBM and PBDB-T:PCBM increased by 18.12% and 20.27%, respectively.