Repurposing Melt Degradation for the Evaluation of Mixed Amorphous-Crystalline Blends

Medicine regulators require the melting points for crystalline drugs, as they are a test for chemical and physical quality. Many drugs, especially salt-forms, suffer concomitant degradation during melting; thus, it would be useful to know if the endotherm associated with melt degradation may be used for characterising the crystallinity of a powder blend. Therefore, the aim of this study was to investigate whether melt-degradation transitions can detect amorphous content in a blend of crystalline and amorphous salbutamol sulphate. Salbutamol sulphate was rendered amorphous by freeze and spray-drying and blended with crystalline drug, forming standards with a range of amorphous content. Crystalline salbutamol sulphate was observed to have a melt-degradation onset of 198.2±0.2°C, while anhydrous amorphous salbutamol sulphate prepared by either method showed similar glass transition temperatures of 119.4±0.7°C combined. Without the energy barrier provided by the ordered crystal lattice, the degradation endotherm for amorphous salbutamol sulphate occurred 50°C below the melting point, with an onset of 143.6±0.2°C. The enthalpies for this degradation transition showed no significant difference between freeze- and spray-dried samples (p>0.05). Distinct from convention, partial integration of the crystalline melt-degradation endotherm was applied to the region 193-221°C which had no contribution from the degradation of amorphous salbutamol sulphate. The linear correlation of these partial areas with amorphous content, R²=0.994, yielded limits of detection and quantification of 0.13% and 0.44% respectively, independent of drying technique. Melt-degradation transitions may be re-purposed for the measurement of amorphous content in powder blends, and they have potential for evaluating disorder more generally.