Event-Triggered Adaptive Asymptotic Tracking Control of Uncertain MIMO Nonlinear Systems With Actuator Faults
Abstract:
In this article, an adaptive event-triggered fault-tolerant asymptotic tracking control problem guaranteeing prescribed performance is addressed for a class of block-triangular multi-input and multioutput uncertain nonlinear systems with unknown nonlinearities, unknown control directions, and actuator faults. Through a systematic co-design of the adaptive control law and the event-triggered mechanism, including fixed and relative threshold strategies, a control scheme with low structure and calculation complexity is designed to conserve system communication and computation resources. In this design, the output asymptotic tracking is achieved. The Nussbaum gain technique is incorporated to overcome unknown control directions with a new adaptive law, and a type of barrier Lyapunov function is adopted to handle the prescribed performance control problem, which contributes to a novel control law with strong robustness. The robust controller can address the uncertainties and couplings derived from the system structure, actuator faults, and event-triggered rules, without using approximating structures or compensators. Besides, the explosion of complexity is avoided. It is proved that all signals of the closed-loop system remain bounded, and system tracking errors asymptotically approach 0 with the prescribed performance, while the Zeno behavior is prevented. Finally, the effectiveness of the proposed control scheme is evaluated via an application example of the half-car active suspension system.
More Related Videos
09:01Gain-compensation Methodology for a Sinusoidal Scan of a Galvanometer Mirror in Proportional-Integral-Differential Control Using Pre-emphasis Techniques
Published on: April 4, 2017
08:18WheelCon: A Wheel Control-Based Gaming Platform for Studying Human Sensorimotor Control
Published on: August 15, 2020
Related Concept Videos
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Linear time-invariant Systems
The input-output behavior of an LTI system can be fully defined by its response to an impulsive excitation at its input. Once this impulse response is known, the system's reaction to any other input can be...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
Control Systems
At the heart...
