Monte Carlo verification of output correction factors for a TrueBeam STx®

The recent publication of the new code of practice IAEA/AAPM TRS-483 introduces output correction factors to correct detector response changes in relative dosimetry of small photon beams. In TRS-483, average correction factors are reported for several detectors in high-energy photon beams at 6 and 10 MV with and without flattening filter. These correction factors were determined by Monte Carlo simulation or experimental measurements using several linacs of different brands and vendors. The goal of this work was to validate the output correction factors reported in TRS-483 for 6 MV photon beams of a TrueBeam STx® linac. The validation was performed using Monte Carlo simulations of four radiation detectors employed in the dosimetry of small photon beams and whose output correction factors were determined using a different radiation source than TrueBeam STx®. The results show that Monte Carlo calculated output correction factors, and those reported in the code of practice TRS-483 fully agree within ∼1%. The use of generic correction factors for a TrueBeam STx® and the detectors studied in this work is suitable for small field dosimetry static beams within the uncertainties of Monte Carlo calculations and output correction factors reported in TRS-483.