Dataset for transient 3D simulations of turbulent premixed flames of Gas-to-Liquid (GTL) fuel

A fan-stirred combustion vessel is used to study the premixed turbulent combustion of diesel, Gas to Liquids (GTL) and 50/50 diesel-GTL and to generate these datasets. A numerical simulation approach is implemented for modelling the premixed combustion of the three fuels under different thermodynamics and turbulence initial conditions, using Zimont Turbulent Flame Speed Closure (Zimont TFC) model. Different parameters are obtained from these simulation runs such as turbulent eddy viscosity (µ), turbulent kinetic energy (k), Damkohler number (Da), Reynolds number (Re_T) and turbulent flame speed (S_t). The raw, filtered and pre-processed data are imported from ANSYS Fluent and then listed on filtered tables for the ease of accessibility. These datasets can be then used to perform research in different related areas such as chemical kinetic mechanisms, ignition delay time, flame ignition mechanisms and flame extinction and diffusion. Also, they can be employed to further understand trends, patterns, and anomalies in data. In addition, they can be compared with other numerical models to establish a robust knowledge about the modelling of premixed turbulent combustion. For more information and discussion of the dataset creation, the reader is directed to the full-length article, "Abdellatif M. Sadeq, Samer F. Ahmed, Ahmad K. Sleiti, Transient 3D simulations of turbulent premixed flames of gas-to-liquid (GTL) fuel in a fan-stirred combustion vessel, Fuel, Volume 291, 2021, 120,184, ISSN 0016 2361, https://doi.org/10.1016/j.fuel.2021.120184" [1].