Optimization of physicochemical, textural, and rheological properties of sour cherry jam containing stevioside by...

The response surface method (RSM) was used to produce sour cherry jam containing stevia sweetener with favorable physicochemical, textural, and rheological properties. The experiments were designed based on RSM using a central composite design (CCD) with three independent variables: sugar, pectin, and stevia. Sample processing was performed at five levels of sucrose (10%-50%), pectin (0.1%-0.5%), and stevia (0.2%-0.6%) at a constant fruit weight of 300 g. To evaluate the jam, the physicochemical, textural, and rheological properties of the jam were determined and optimized. The concentrations of sucrose, pectin, and stevia had a significant effect on the textural and rheological properties of the jam. The results showed that increasing the concentration of sucrose is the main factor in increasing the soluble solids and the total sugar content of the jam. Pectin had a positive effect on textural characteristics such as hardness and adhesiveness of the jam, while the cohesiveness of the jam decreased with increasing pectin. Herschel-Bulkley model was appropriate for describing the rheological behavior of the stable state of sour cherry jam containing stevia. Decreasing sucrose concentration is accompanied by a decrease in yield stress and consistency index of jam samples due to the TSS reduction. Pectin also had a positive effect on the amount of yield stress and consistency index. Dynamic rheological tests indicated that the sour cherry jam is a weak gel. The predominant viscose behavior and the formation of a dilute solution were evident in the samples with 10% and 20% sucrose concentrations. The most favorable condition for the production of the jam was obtained at a 36.5% sugar, 0.277% pectin, and stevia 0.30%.