Related Experiment Video
Updated: Oct 31, 2025

Asymmetric Thermoelectrochemical Cell for Harvesting Low-grade Heat under Isothermal Operation
Published on: February 5, 2020
Leaf-Inspired Flexible Thermoelectric Generators with High Temperature Difference Utilization Ratio and Output Power
Abstract:
The inherently small temperature difference in air environment restricts the applications of thermoelectric generation in the field of Internet of Things and wearable electronics. Here, a leaf-inspired flexible thermoelectric generator (leaf-TEG) that makes maximum use of temperature difference by vertically aligning poly(3,4-ethylenedioxythiophene) polystyrene sulfonate and constantan thin films is demonstrated. Analytical formulae of the performance scales, i.e., temperature difference utilization ratio (φth) and maximum output power (Pmax), are derived to optimize the leaf-TEG dimensions. In an air duct (substrate: 36 °C, air: 6 °C, air flowing: 1 m s-1), the 10-leaf-TEG shows a φth of 73% and Pmax of 0.38 µW per leaf. A proof-of-concept wearable 100-leaf-TEG (60 cm2) generates 11 µW on an arm at room temperature. Furthermore, the leaf-TEG is flexible and durable that is confirmed by bending and brushing over 1000 times. The proposed leaf-TEG is very appropriate for air convection scenarios with limited temperature differences.
Related Concept Videos
Mechanism of heat transfer
Heating and Cooling Curves
For instance, the addition of heat raises the temperature of a solid; the amount of heat absorbed depends on the heat capacity of the solid (q = mcsolidΔT). According to thermochemistry, the relation between the amount of heat absorbed or released by a substance, q, and its...
Joule-Thomson Effect
This experiment forces high-pressure gas through a throttle valve or a porous plug to a lower-pressure region. The gas expands as it passes through to...
Refrigerators and Heat Pumps
A household refrigerator removes heat from...
Mechanisms of Heat Transfer
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant...
Mechanisms of Heat Transfer II

