Memristor-CMOS Hybrid Neuron Circuit with Nonideal-Effect Correction Related to Parasitic Resistance for Binary-Memristor-Crossbar Neural Networks
Related Experiment Video
Updated: Oct 25, 2025

Assembly and Characterization of Biomolecular Memristors Consisting of Ion Channel-doped Lipid Membranes
Published on: March 9, 2019
Tien Van Nguyen1, Jiyong An1, Kyeong-Sik Min1
1School of Electrical Engineering, Kookmin University, Seoul 02707, Korea.
Abstract:
Voltages and currents in a memristor crossbar can be significantly affected due to nonideal effects such as parasitic source, line, and neuron resistance. These nonideal effects related to the parasitic resistance can cause the degradation of the neural network's performance realized with the nonideal memristor crossbar. To avoid performance degradation due to the parasitic-resistance-related nonideal effects, adaptive training methods were proposed previously. However, the complicated training algorithm could add a heavy computational burden to the neural network hardware. Especially, the hardware and algorithmic burden can be more serious for edge intelligence applications such as Internet of Things (IoT) sensors. In this paper, a memristor-CMOS hybrid neuron circuit is proposed for compensating the parasitic-resistance-related nonideal effects during not the training phase but the inference one, where the complicated adaptive training is not needed. Moreover, unlike the previous linear correction method performed by the external hardware, the proposed correction circuit can be included in the memristor crossbar to minimize the power and hardware overheads for compensating the nonideal effects. The proposed correction circuit has been verified to be able to restore the degradation of source and output voltages in the nonideal crossbar. For the source voltage, the average percentage error of the uncompensated crossbar is as large as 36.7%. If the correction circuit is used, the percentage error in the source voltage can be reduced from 36.7% to 7.5%. For the output voltage, the average percentage error of the uncompensated crossbar is as large as 65.2%. The correction circuit can improve the percentage error in the output voltage from 65.2% to 8.6%. Almost the percentage error can be reduced to ~1/7 if the correction circuit is used. The nonideal memristor crossbar with the correction circuit has been tested for MNIST and CIFAR-10 datasets in this paper. For MNIST, the uncompensated and compensated crossbars indicate the recognition rate of 90.4% and 95.1%, respectively, compared to 95.5% of the ideal crossbar. For CIFAR-10, the nonideal crossbars without and with the nonideal-effect correction show the rate of 85.3% and 88.1%, respectively, compared to the ideal crossbar achieving the rate as large as 88.9%.
Related Concept Videos
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...

