Related Experiment Video
Updated: Oct 19, 2025

In Situ Transmission Electron Microscopy with Biasing and Fabrication of Asymmetric Crossbars Based on Mixed-Phased a-VOx
Published on: May 13, 2020
Ferroelectric transistors with asymmetric double gate for memory window exceeding 12 V and disturb-free read
Halid Mulaosmanovic1, Dominik Kleimaier2, Stefan Dünkel2
1NaMLab gGmbH, 01187 Dresden, Germany. halid.mulaosmanovic@namlab.com.
Abstract:
Ferroelectric field-effect transistors (FeFETs) with a single gate structure and using the newly discovered ferroelectric hafnium oxide as an active material are attracting considerable interest for nonvolatile memory devices. However, such FeFETs struggle to achieve a large separation between the two logic states (memory window, MW) because of the thickness limitations of the ferroelectric film. Moreover, they are affected by detrimental disturbs coming from the read operation because of the shared write and read paths. Therefore, significant performance improvements are needed for the device to compete with established memory technologies like flash. Here, we present an asymmetric double-gate FeFET structure, where only one gate stack comprises the ferroelectric layer. We propose a novel read operation at the non-ferroelectric gate and demonstrate an amplified MW exceeding 12 V thanks to the enhanced body effect factor and the increased sensitivity of the transfer characteristics to the ferroelectric polarization. As a result, the above physical limitation is circumvented, thus by far outperforming the MW values reported in the literature. Based on this, we implement the multi-level cell storage featuring 4 bits per cell and stable data retention. Finally, an essential benefit originating from the separated write and read paths in our structure is exploited to demonstrate the fully disturb-free read operation. Besides memory, this could be particularly favorable for those neuromorphic and in-memory computing concepts with an occasional update of the stored variable but a very frequent read.
Related Concept Videos
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
Field Effect Transistor
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...

