Related Experiment Video
Updated: Oct 7, 2025

Fabric Moisture Uniform Control to Study the Influence of Air Impingement Parameters on Fabric Drying Characteristics
Published on: August 19, 2019
Energy and Exergy Analyses of Rice Drying in a Novel Electric Stationary Bed Grain-Drying System with Internal
Guiying Wang1, Wenfu Wu1,2, Daping Fu1
1College of Biological and Agricultural Engineering, Jilin University, 5988 Renmin Road, Changchun 130025, China.
Abstract:
In our study, we developed a system to reduce both energy consumption and pollutant discharge during the drying process. We present a new technology, a stationary bed grain-drying test device based on the internal circulation of the drying medium (ICODM). A rice-drying experiment was carried out inside of it, and the influences of air temperature (AT) and air velocity (AV) on the energy and exergy efficiencies (EEE) as well as the improvement potential rate (IPR) and the sustainability index (SI) of the rice-drying process were studied. The following conclusions were obtained: when the rice was dried at a temperature of below 55 °C and an AV across the grain layer of 0.5 m/s, the average EEE during the drying process was 48.27-72.17% and 40.27-71.07%, respectively, demonstrating an increasing trend as the drying medium temperature increased. When the rice was dried using an AV across the grain layer in the range of 0.33-0.5 m/s and a temperature of 40 °C, the two values were 39.79-73.9% and 49.66-71.04%, respectively, demonstrating a decreasing trend as the drying medium flow velocity increased. IPR and SI were 4.1-8.5 J/s and 1.9-2.7, respectively, at a drying temperature of 30-55 °C and an AV of 0.33-0.5 m/s. These conclusions can provide helpful guidance for the optimization and control of the rice-drying process in terms of saving energy.
More Related Videos
08:52Method to Produce Durable Pellets at Lower Energy Consumption Using High Moisture Corn Stover and a Corn Starch Binder in a Flat Die Pellet Mill
Published on: June 15, 2016
07:34Evaluation of Integrated Anaerobic Digestion and Hydrothermal Carbonization for Bioenergy Production
Published on: June 15, 2014
Related Concept Videos
Mechanism of heat transfer
Mechanisms of Heat Transfer
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant...
Mechanisms of Heat Transfer II
Cyclic Processes And Isolated Systems
In the case of a non-isolated system, the change in the internal energy is zero only if the process is cyclic. A thermodynamic process is considered cyclic if the system undergoes a series of changes and returns to its initial state.
Consider a cyclic process that returns to its initial state, undergoing a four-step process. The heat transfer along each...
Mechanisms of Heat Transfer I
Conservation of Energy in Control Volume
For steady flow systems, the time derivative of the stored energy becomes zero since there is no energy accumulation within the control volume. This simplifies the energy equation to: