The Design of Terahertz Frequency Quadruplers Based on Discrete Schottky Diodes

On the basis of the W-band power source, a single-stage frequency quadrupler method was used to implement two 335 GHz frequency quadruplers. The two frequency quadruplers adopted a traditional binomial matching structure and an improved gradient line matching structure, respectively. An idle loop was added to the overall circuit in the design of the DC filter and low-pass filter. The improved gradient line matching structure reduced the circuit length while increasing the bandwidth, effectively reducing the power loss on the transmission line. A micro-strip circuit was fabricated with a 50 μm thick quartz circuit and was mounted onto a split waveguide block. The results showed that the output power of the quadrupler with the improved matching structure was better than that of the quadrupler with the conventional matching structure. The peak output power of the improved frequency quadrupler was 4.75 mW at 333 GHz when driven with 200 mW. In contrast, this improved structure broadened the bandwidth by 8 GHz and reduced the length of the substrate by 0.607 mm, effectively reducing the length of the traditionally designed circuit by 11.5%.