Robust H∞ Control for Semilinear Parabolic Distributed Parameter Systems With External Disturbances via Mobile
Abstract:
This article presents a robust H∞ feedback compensator design approach for semilinear parabolic distributed parameter systems (DPSs) with external disturbances via mobile actuators and sensors. An H∞ performance constraint is introduced to deal with the external disturbances from the model and measurement noise. Two types of feedback compensators are designed in terms of the collocated and noncollocated mobile actuators and sensors. By the Lyapunov direct technique, some sufficient conditions based on LMI constraints are proposed for the exponential stability under H∞ performance constraints in the L2 -norm. Moreover, the open-loop and closed-loop well-posedness of the semilinear DPSs with external disturbances are analyzed via the C0 -semigroup theory approach. Finally, extensive numerical simulation results for semilinear DPSs with external disturbances via collocated and noncollocated mobile actuators and sensors are shown to verify the effectiveness of the proposed method.
Related Concept Videos
PI Controller: Design
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Time and frequency -Domain Interpretation of PI Control
Acting as a low-pass filter, the PI controller slows the system's response and extends settling times. This requires...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length,...
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...


