Related Experiment Video
Updated: Sep 30, 2025

The Modular Design and Production of an Intelligent Robot Based on a Closed-Loop Control Strategy
Published on: October 14, 2017
Grey-box modelling and fuzzy logic control of a Leader-Follower robot manipulator system: A hybrid Grey Wolf-Whale
Ololade O Obadina1, Mohamed A Thaha2, Zaharuddin Mohamed3
1School of Engineering and Materials Science, Queen Mary University of London, UK.
Abstract:
This study presents the development of a grey-box modelling approach and fuzzy logic control for real time trajectory control of an experimental four degree-of-freedom Leader-Follower Robot (LFR) manipulator system using a hybrid optimisation algorithm, known as Grey Wolf Optimiser (GWO) - Whale Optimisation Algorithm (WOA). The approach has advantages in achieving an accurate model of the LFR manipulator system, and together with a better trajectory tracking performance. In the first instance, the white box model is formed by modelling the dynamics of the follower manipulator using the Euler-Lagrange formulation. This white-box model is then improved upon by re-tuning the model's parameters using GWO-WOA and experimental data from the real LFR manipulator system, thus forming the grey-box model. A minimum improvement of 73.9% is achieved by the grey-box model in comparison to the white-box model. In the latter part of this investigation, the developed grey-box model is used for the design, tuning and real-time implementation of a fuzzy PD+I controller on the experimental LFR manipulator system. A 78% improvement in the total mean squared error is realised after tuning the membership functions of the fuzzy logic controller using GWO-WOA. Experimental results show that the approach significantly improves the trajectory tracking performance of the LFR manipulator system in terms of mean squared error, steady state error and time delay.
Related Concept Videos
Three-Dimensional Force System:Problem Solving
To solve a three-dimensional force system, first resolve each force into its respective scalar components. Do this using...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Two-Dimensional Force System: Problem Solving
The first step to solving a two-dimensional force system problem is to draw a free-body diagram of the object under consideration. This diagram helps identify all the external forces acting on the object, including their...
Controller Configurations
Control-system compensation involves various configurations, most commonly series or cascade compensation, in which the controller...
Distributed Loads: Problem Solving
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...

