Silver Nanowires and Silanes in Hybrid Functionalization of Aramid Fabrics

New functionalization methods of meta- and para-aramid fabrics with silver nanowires (AgNWs) and two silanes (3-aminopropyltriethoxysilane (APTES)) and diethoxydimethylsilane (DEDMS) were developed: a one-step method (mixture) with AgNWs dispersed in the silane mixture and a two-step method (layer-by-layer) in which the silanes mixture was applied to the previously deposited AgNWs layer. The fabrics were pre-treated in a low-pressure air radio frequency (RF) plasma and subsequently coated with polydopamine. The modified fabrics acquired hydrophobic properties (contact angle Θ_W of 112-125°). The surface free energy for both modified fabrics was approximately 29 mJ/m², while for reference, meta- and para-aramid fabrics have a free energy of 53 mJ/m² and 40 mJ/m², respectively. The electrical surface resistance (R_s) was on the order of 10² Ω and 10⁴ Ω for the two-step and one-step method, respectively. The electrical volume resistance (R_v) for both modified fabrics was on the order of 10² Ω. After UV irradiation, the Rs did not change for the two-step method, and for the one-step method, it increased to the order of 10¹⁰ Ω. The specific strength values were higher by 71% and 63% for the meta-aramid fabric and by 102% and 110% for the para-aramid fabric for the two-step and one-step method, respectively, compared to the unmodified fabrics after UV radiation.