Related Experiment Video
Updated: Sep 27, 2025

Creating Rapid Oxygen Oscillations in Microbial Single-cell Growth Analysis using a Microfluidic Double-layer Device
Published on: July 18, 2025
[Investigation on Oxygen Gas-liquid Mass Transfer in Sewage Pipelines Under Enhanced Ventilation]
Zhou Yang1,2, Zhi-Qiang Zhang1,2, Jing Yang1,2
1School of Environmental and Municipal Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China.
Abstract:
The anaerobic environment of sewers is the main cause of the production of toxic and harmful gases such as hydrogen sulfide and methane. The installation of septic-tanks between the drainage standpipes and municipal sewage pipes has aggravated the current situation of poor ventilation in sewage pipes. A system of enhanced ventilation has been formed. By connecting the drainage standpipes and sewage pipes, the system of enhanced ventilation can ameliorate the ventilation of sewage pipes and improve the gas-phase space environment. The experimental and computational fluid dynamics (CFD) simulation methods were established to explore the law of oxygen gas-liquid mass transfer under the different sewage flow rates or wind speeds. This study aimed to seek a method to enhance the oxygen mass transfer, suppress the anaerobic environment, and achieve the purpose of long-term control of harmful gases. The results showed that increasing the gas-liquid flow rates can accelerate the oxygen mass transfer, and the volumetric mass transfer coefficient increased by 3.5×10-4 min-1 for every increase of 0.1 m·s-1. However, the faster sewage reduced hydraulic retention time. The mass transfer time of oxygen was also shortened, and the promotion effect was not as good as that by enhancing the gas velocity in the pipelines. At the same time, when the average gas velocity increased by 0.1 m·s-1, the lengths of pipes where dissolved oxygen could effectively inhibit H2S increased by 25 m.
More Related Videos
Related Concept Videos
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Gas Exchange and Transport
Turbulent Flow: Problem Solving
Temperature is a key factor in CO2 solubility. In this case, the CO2 gas and the liquid are cooled to 20°C. Lower temperatures...
Single Pipe Systems
In a Type I problem, fluid properties (density and viscosity), pipe characteristics (including diameter, length, and surface roughness), and the flow rate or average velocity are...

