Related Experiment Video
Updated: Sep 24, 2025

Stable Aqueous Suspensions of Manganese Ferrite Clusters with Tunable Nanoscale Dimension and Composition
Published on: February 5, 2022
Simultaneous immobilization of NH4 + and Mn2+ from electrolytic manganese residue using phosphate and magnesium
Hongliang Chen1,2, Qian Long1, Yutao Zhang1,2
1College of Chemistry and Chemical Engineering, Anshun University No. 25 Xueyuan Road, Anshun Xixiu Zone Anshun Guizhou 561000 PR China 278631830@qq.com +86-0851-32214860 +86-0851-32214860.
Abstract:
Immobilization of contaminants from electrolytic manganese residue (EMR) is essential for the safe stacking and reuse of EMR. This study provides experiment results for the simultaneous immobilization of NH4 + and Mn2+ from EMR using Na3PO4·12H2O and MgSO4·7H2O (PS) agents, as well as Na3PO4·12H2O and MgO (PO) agents. The optimum reaction conditions, characteristics of immobilization, mechanism and the economy of alternative chemicals were determined and are discussed. The results indicated that the immobilization efficiencies of NH4 + and Mn2+ were 92.4% and 99.9% respectively under the following conditions: a MgSO4·7H2O : Na3PO4·12H2O : EMR mass ratio of 0.113 : 0.175 : 1, a CaO : EMR mass ratio of 0.03 : 1 and a reaction time of 1 h using PS agents. The concentration of NH4 + in the leach liquor reduced from 1264 to 98 mg L-1 after immobilization. The concentration of heavy metal ions decreased sharply in the leach liquor and met the Integrated Wastewater Discharge Standard of China (GB8978-1996). The characteristics of immobilization indicated that NH4 + was immobilized to form NH4MgPO4·6H2O and that Mn2+ was immobilized to form Mn5(PO4)2(OH)4, Mn3(PO4)2·3H2O and Mn(OH)2. An economic evaluation showed that using PS agents had lower associated cost than using PO agents.
More Related Videos
Related Concept Videos
Qualitative Analysis
For instance, group IV...
Masking and Demasking Agents
There are many masking agents, such as cyanide, fluoride, triethanolamine, thiourea, and 2,3-bis(sulfanyl)propan-1-ol (formerly 2,3-dimercapto-1-propanol), with the masking agent chosen based on...
Washing, Drying, and Ignition of Precipitates
Extraction: Advanced Methods

