Related Experiment Video
Updated: Sep 22, 2025
Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer
Published on: January 10, 2017
Monodisperse Low-Bandgap Macromolecule-Based 5,5'-Bibenzo[c][1,2,5]thiadiazole Swivel Cruciform for Organic Solar
Debin Ni1, Baofeng Zhao2, Ting Shi1
1School of Optical and Electronic Information, Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074, P. R. China.
Abstract:
A novel low bandgap star-like macromolecule was synthesized and applied as electron donor material in the bulk heterojunction solar cells, in which the 5,5'-bibenzo[c][1,2,5]thiadiazole was used as the central node, in conjunction with four conjugated donor-acceptor arms. Compared with the corresponding small molecule with first generation arms, the macromolecule with second generation branches exhibited significantly enhanced photovoltaic device performances (blended with PC71BM as the active layer) due to dramatically improved short-circuit current density (Jsc) and fill factor (FF). The improvement in Jsc and FF can be attributed to the more broad absorption and the more favorable phase separation when comparing a monodisperse macromolecule with the second generation arms (SFTBT) with a small molecule with first generation branches (DFTBT).
More Related Videos
10:19Solution-Processed "Silver-Bismuth-Iodine" Ternary Thin Films for Lead-Free Photovoltaic Absorbers
Published on: September 27, 2018
06:49In situ Grazing Incidence Small Angle X-ray Scattering on Roll-To-Roll Coating of Organic Solar Cells with Laboratory X-ray Instrumentation
Published on: March 2, 2021
