Related Experiment Video
Updated: Sep 21, 2025

Silicon Metal-oxide-semiconductor Quantum Dots for Single-electron Pumping
Published on: June 3, 2015
High-performance silicon PIN diode switches in the 2-µm wave band
Abstract:
The 2-µm wave band has attracted significant research interest due to its potential applications for next-generation high-capacity optical communication and sensing. As the key component, fast optical switches are essential for an advanced and reconfigurable optical network. Motivated by this prospect, we propose and demonstrate two typical silicon PIN diode switches at 2 µm. One is based on a coupled microring resonator (CMRR), and the other is based on a Mach-Zehnder interferometer (MZI) with a push-pull-like configuration. The measured insertion loss of the CMRR switch is <2.5 dB, and the cross talk is <-10.8 dB. The insertion loss of the MZI switch is <2 dB, and the cross talk is <-15.6 dB. The switch times of these two structures are both lower than 12.5 ns.
Related Concept Videos
Schottky Barrier Diode
Diode: Reverse bias
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
Diode: Forward bias
The behavior of a diode in forward bias...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...

