Related Experiment Video
Updated: Sep 3, 2025

Pool-Boiling Heat-Transfer Enhancement on Cylindrical Surfaces with Hybrid Wettable Patterns
Published on: April 10, 2017
Performance of Microchannel Heat Sink Made of Silicon Material with the Two-Sided Wedge
Aditya Vatsa1, Tabish Alam2, Md Irfanul Haque Siddiqui3
1Department of Mechanical Engineering, Thapar Institute of Engineering and Technology, Patiala 147004, India.
Abstract:
New designs of the microchannel with a two-sided wedge shape at the base were studied numerically. Five different wedge angles ranging from 3° to 15° were incorporated into the microchannel design. Simulation of this novel microchannel was carried out using Computational Fluid Dynamics (CFD). Three-dimensional models of the microchannel heat sink were created, discretized, and based on Navier-Stokes and energy equations; laminar numerical solutions were obtained for heat transfer and pressure drop. Flow characteristics of water as coolant in a microchannel were studied. It was observed that numerical results are in good agreement with experimental results. It was found that the Nusselt number and friction factor are significantly varied with the increase in Reynolds number. The Nusselt number varies in the following ranges of 5.963-8.521, 5.986-8.550, 6.009-8.568, 6.040-8.609, and 6.078-8.644 at 3°, 6°, 9°, 12°, and 15°, respectively. The microchannel with a wedge angle of 15° was found to be better in terms of Nusselt number and thermo-hydraulic performance. The enhancement in the Nusselt number is found as 1.017-1.036 for a wedge angle of 15°; however, friction factors do not show the perceptible values at distinct values of wedge angle. Moreover, the thermo-hydraulic performance parameters (THPP) were evaluated and found to be maximum in the range of 1.027-1.045 for a wedge angle of 15°. However, minimum THPP was found in the range of 1.005-1.0185 for a wedge angle of 3°.
Related Concept Videos
Mechanisms of Heat Transfer II
Mechanisms of Heat Transfer I

