Related Experiment Video
Updated: Sep 3, 2025

Colloidal Synthesis of Nanopatch Antennas for Applications in Plasmonics and Nanophotonics
Published on: May 28, 2016
Investigation of a Miniaturized Four-Element Antenna Integrated with Dipole Elements and Meta-Couplers for 5G
Asutosh Mohanty1, Bikash Ranjan Behera2, Nasimuddin Nasimuddin3
1School of Electronics Engineering, Kalinga Institute of Industrial Technology Bhubaneswar, Bhubaneswar 751024, India.
Abstract:
A miniaturized four-element antenna of 20 mm × 20 mm with edge-to-edge distance of 4.9 mm between the array antennas operating from 4.6−8.6 GHz is investigated in this article. The antenna consists of 4 × integrated dipole driven elements, and complementary split ring resonator (CSRR) metacells are loaded on the both sides of each dipole arms. The loaded meta-couplers magnetically couple to dipole drivers, and the induced resonance effect improves the 10-dB impedance bandwidth (IBW) to 60.6%. To improvise the isolation between antenna elements, metallic vias are implemented that trap electromagnetic (EM)-surface waves to condense into the ground. So, the meta-couplers induce electromagnetic (EM)-propagation as surface wave trapments for radiation and decouple near-field condensed currents, acting as couplers/decouplers. The maximum isolation achieved is >−22.5 dB without any external decoupling network. The diversity parameters indicate good attributes in isotropic, indoor, and outdoor channel environments with an envelope correlation coefficient (ECC) < 0.165 and realized gain of 5.5 dBi with average radiation efficiency of 80−90% in the desired operating bands. An equivalent circuit model using lumped components is designed for the proposed four-element antenna. For validation, a prototype antenna is fabricated and measured to be implemented in 5G applications, which shows good correlation with the full-wave simulated results.
Related Concept Videos
The Antenna Complex
Mesh Analysis for AC Circuits
The process of harmonizing these impedances begins with a clear understanding of the input and output signals. Once these signals are known, the...
Design Example: Capacitance Multiplier Circuit
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.
Induced Electric Dipoles
Since the absolute value of potential energy holds no physical meaning, its zero value can be chosen as per...

