Related Experiment Video
Updated: Sep 3, 2025

Ex Vivo Porcine Experimental Model for Studying and Teaching Lung Mechanics
Published on: April 19, 2024
On the design of a compact emergency mechanical ventilator with negative expiratory exit pressure for COVID-19
Sheeja Janardhanan1, Vidya Chandran2, Rajesh Rajan3
1School of Naval Architecture and Ocean Engineering, Indian Maritime University, Visakhapatnam, India.
Abstract:
The present work deals with the design of a cylinder-piston arrangement to deliver the required tidal volume (TV) of air to the patient through the respiratory tract especially in the setting of severe acute respiratory syndrome corona virus 2 (SARS CoV-2) or corona virus disease (COVID-19). The design ensures that only the desired volume of air is delivered in each breath and a negative pressure is retained at the delivery point in a separate cylinder. The frequency of piston motion is the same as that of the average human respiratory rate (RR). The effect of negative pressure on time of evacuation under the present condition has been verified. The present design provides a compact ventilator unit with a surface area of 0.8 × 0.4 m2 with a minimal power requirement of 116.48 W. An RR of 16 is obtained with a volume flow rate in lit/s by using a twin cylinder arrangement with bore diameter 0.1 m and length 0.4 m. The ratio of inspiration time to expiration time is designed to be 1:2 by controlling the stroke frequency as 16 and piston speed 0.32 m/s. The present design provides promising quantitative information on the design of an automated continuous mechanical ventilator (CMV), which is different from bag mask valve (BMV) operated ventilators, and on preventing and minimising barotrauma.
More Related Videos
05:46A Novel Inhalation Mask System to Deliver High Concentrations of Nitric Oxide Gas in Spontaneously Breathing Subjects
Published on: May 4, 2021
09:31Normothermic Negative Pressure Ventilation Ex Situ Lung Perfusion: Evaluation of Lung Function and Metabolism
Published on: February 14, 2022
Related Concept Videos
Mechanical Ventilation II: Invasive Ventilation
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...
Mechanical Ventilation I: Indication and Settings
Mechanical Ventilation III: Noninvasive Ventilation
Noninvasive Positive-Pressure Ventilation...
Ventilatory Modes
There are three ventilatory modes: full support, partial support, and spontaneous. These are described below.
Full Support Modes
Full support modes include controlled mechanical ventilation, continuous mandatory...
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Cardiopulmonary Resuscitation II: ACLS Airway Management