Cooperative ETM-Based Adaptive Neural Network Tracking Control for Nonlinear Pure-Feedback MASs: A Special-Shaped
Abstract:
This article solves the cooperative adaptive tracking control problem for nonlinear pure-feedback multi-agent systems (MASs). Compared with the previous achievements of adaptive control of pure-feedback MASs, the partial derivative of the nonaffine function may not exist by using decoupling technology. In the controller design framework based on the backstepping technique, the additional state variables are processed using the special properties of the radial basis function neural networks (RBF NNs). A special-shaped Laplacian matrix is proposed to unify the leader gain form in the tracking error design process (the coefficient in the second term of tracking error). Furthermore, an event trigger mechanism (ETM) is introduced to save resources. The constructed controller under the ETM can not only stabilize the system states but also make the tracking error reach a small accuracy. Finally, the simulation results demonstrated the feasibility of the proposed method.
More Related Videos
09:01Gain-compensation Methodology for a Sinusoidal Scan of a Galvanometer Mirror in Proportional-Integral-Differential Control Using Pre-emphasis Techniques
Published on: April 4, 2017
08:18WheelCon: A Wheel Control-Based Gaming Platform for Studying Human Sensorimotor Control
Published on: August 15, 2020
Related Concept Videos
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length,...
Linear Approximation in Frequency Domain
In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear....
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Mechanistic Models: Compartment Models in Algorithms for Numerical Problem Solving
In individual population analyses, different algorithms are employed, such as Cauchy's method, which uses a...
Load-frequency control
