FBG Spectrum Regeneration by Ni-Coating and High-Temperature Treatment

FBG sensors are used in many scientific and industrial fields for assessing the structural integrity of mechanical components and in very high (above 600 °C) or very low (cryogenic) temperature applications. The main concerns with the use of such sensors in applications involving extreme temperatures are related partly to the instability of the reflected spectrum, which tends to dissolve into the noise floor, and partly to the degradation of the mechanical properties of the optical fiber, which tends to worsen the inherent brittleness. All of this raises the need for a robust nickel protective coating to ensure the grating's integrity in high-temperature environments. In addition, the inherent brittleness of fiber-optic gratings leaves one to wonder whether it is possible to recover a broken, seemingly unusable sensor. In this way, a single-peak commercial FBG was intentionally broken in the middle of the grating length and re-spliced, inducing a strongly asymmetric chirped-like spectrum; then, a nickel coating was electrodeposited on its surface. The most important outcome achieved by this work is the regeneration of a highly distorted reflected spectrum through three thermal cycles performed from room temperature up to 500, 750, and 800 °C, respectively. After reaching a temperature of at least 700 °C, the spectrum, which has been drastically altered by splicing, becomes stable and restores its single peak shape. A further stabilization cycle carried out at 800 °C for 80 min led to an estimation of the stabilizing time of the new single-peak reflected spectrum.