Near-maximum microwave absorption in a thin metal film at the pseudo-free-standing limit

Electromagnetic absorbers based on ultra-thin metallic film are desirable for many applications such as plasmonics, metamaterials, and long-wavelength detectors. A metallic film will achieve a maximum 50% of electromagnetic wave absorption, frequency independent, at a thickness defined by its conductivity, typically in the sub-Angstrom range for good metals if bulk conductivity is maintained throughout. This makes it extremely difficult to obtain substantial absorption from thin metal films, in contrast to 2D materials such as graphene. Luckily, however, from a practical point of view, metal conductivity is drastically reduced as the film becomes sub-100 nm, to make it a race between the thinnest possible metal thickness experimentally achievable vs the conductivity reduction. Here, we demonstrate a near-50% absorption at a gold film thickness of 6.5 nm, with conductivity much reduced from the bulk value, down to the range of 10⁶ Siemens per meter. Studying the effect of the substrate thickness, we found that the common cover glass, with its thickness much smaller than the wavelength, achieves symmetric absorption of 44%, implying that a pseudo-free-standing limit is achieved. Our work may find applications in infrared sensing as in bolometers and biomedical sensing using microwaves.