Investigation on the Anisotropic Wetting Properties of Water Droplets on Bio-Inspired Groove Structures Fabricated by...

The self-driving structure to orientate the water movement has attracted considerable attention. Inspired by the wedgelike structures of biological materials in nature, such as spider silks and cactus spines, anisotropic spreading can be realized by combining Laplace pressure gradient and hydrophilic surface. In this study, a series of groove patterns were fabricated by a combination of 3D printing and surface modification. PLA pattern was modified by the atmospheric pressure plasma, followed by grafting with hydrolyzed APTES. This work reports the anisotropic transport of water droplets on a series of designed dart-shaped groove patterns with specific angles in the main arrow and tail regions. This structure can induce capillary force to regulate droplets from the main cone to two wedgelike, whereas the droplets are hindered toward the opposite side is oat the vicinity of the groove's tail. By means of the experiment, the mechanism of water transport in this pattern was revealed. This study can contribute a potential approach to manipulate and apply anisotropic wetting in many fields.