Related Experiment Video
Updated: Aug 20, 2025

Aerosol-assisted Chemical Vapor Deposition of Metal Oxide Structures: Zinc Oxide Rods
Published on: September 14, 2017
Metallic Structures Based on Zinc Oxide Film for Enzyme Biorecognition
Nicoleta Iftimie1, Rozina Steigmann1, Dagmar Faktorova2
1NDT Department, National Institute of Research and Development for Technical Physics, 700050 Iasi, Romania.
Abstract:
Two structures (Ag/ZnO/ITI/glass: #1 sample and Ag/ZnO/SiO2/Si: #2 sample) are investigated, on the one hand, from the point of view of the formation of evanescent waves in the gratings of metal strips on the structures when the incident TEz wave in the radio frequency range is used. The simulation of the formation of evanescent waves at the edge of the Ag strips, with thicknesses in the range of micrometers, was carried out before the test in the subwavelength regime, with the help of a new improved transducer with metamaterial (MM) lenses. By simulation, a field snapshot was obtained in each sequence of geometry. The evanescent waves are emphasized in the plane XY, due to the scattering of the field on the edge of the strips. On the other hand, ZnO nanoparticles are investigated as a convenient high-efficiency biodetection material, where these structures were used as a biosensitive element to various enzymes (glucose, cholesterol, uric acid, and ascorbic acid). The obtained results demonstrate that the investigated structures based on ZnO nanostructures deposited on different supports are fast and sensitive for enzyme detection and can be successfully incorporated into a device as a biosensing element.

