Formation of a 3D Particle Array Actuated by Ultrasonic Traveling Waves in a Regular Polygon Resonator

Acoustic radiation forces have been extensively studied regarding static particles, cell patterning, and dynamic transportation. Compared with standing wave manipulation, traveling wave manipulation can be more easily modulated in real time and has no matching requirement between the size of the resonant cavity and the sound frequency. In this work, we present an efficient, multi-layer microparticle pattern technique in a 3D polygon cavity with a traveling bulk acoustic wave. There are two types of excitation modes: the interval excitation mode (IEM) and the adjacent excitation mode (AEM). We conducted theoretical and simulation analyses, and our results show that both of these modes can form particle arrays in the resonant cavity, which is in accordance with the experimental results. The array spacings in the IEM and AEM were about 0.8 mm and 1.3 mm, respectively, while the acoustic frequency was 1MHz. Double-layer particle patterns were arrayed by a double in the resonant cavity. The spacing between the two layers was set at 3.0 mm. The line spacings were about 0.4 mm in both layers. The line width was 0.2 mm, which was larger than the single layer. The results show that ultrasonic traveling waves are a feasible method to manipulate particles and cells that form 3D patterns in particle-fluid flows.