Adaptive Event-Triggered Fast Finite-Time Stabilization of High-Order Uncertain Nonlinear Systems and its Application
Abstract:
This article is concerned with the global fast finite-time adaptive stabilization for a class of high-order uncertain nonlinear systems in the presence of serious nonlinearities and constraint communications. By renovating the technique of continuous feedback domination to the construction of a serial of integral functions with nested sign functions, this article first proposes a new event-triggered strategy consisting of a sharp triggered rule and a time-varying threshold. The strategy guarantees the existence of the solutions of the closed-loop systems and the fast finite-time convergence of original system states while reaching a compromise between the magnitude of the control and the trigger interval. Quite different from traditional methods, a simple logic is presented to avoid searching all the possible lower bounds of trigger intervals. An example of the maglev system and a numerical example are provided to demonstrate the effectiveness and superiority of the proposed strategy.
More Related Videos
11:44Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators
Published on: August 15, 2014
11:06A Human-machine-interface Integrating Low-cost Sensors with a Neuromuscular Electrical Stimulation System for Post-stroke Balance Rehabilitation
Published on: April 12, 2016
Related Concept Videos
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length,...
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
Transient and Steady-state Response
These test signals are integral in designing control systems to exhibit two key performance aspects: transient response and steady-state...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Stability
The stability of an LTI system is determined by the roots of its characteristic equation, known as poles. A system is stable if it produces a bounded...
Linear time-invariant Systems
The input-output behavior of an LTI system can be fully defined by its response to an impulsive excitation at its input. Once this impulse response is known, the system's reaction to any other input can be...
