Related Experiment Video
Updated: Aug 13, 2025
A Test Bed to Examine Helmet Fit and Retention and Biomechanical Measures of Head and Neck Injury in Simulated Impact
Published on: September 21, 2017
Head excursions of rearward-facing child restraint systems in rear impacts
D A Patton1, J A Mansfield2, J Maheshwari1
1Center for Injury Research and Prevention, Children's Hospital of Philadelphia, Philadelphia, Pennsylvania.
Objective:
The aim of the current study was to quantify the head excursions of pediatric anthropomorphic test devices (ATDs) seated in rearward-facing child restraint system (CRS) models during rear impact sled tests and compare to roof heights of vehicles in the current fleet to assess the possibility of head contact against the vehicle roof.
Methods:
Head excursions of ATDs seated in rearward-facing CRS models were analyzed from high-speed video data from 14 rear impact sled tests across two different series. Tests were conducted in rigidized vehicle seats from recent model year vehicles. Rearward-facing infant and convertible CRS models were tested with a variety of pediatric ATDs aged 12 months to 6 years in a variety of installation conditions (e.g., lower anchors or seat belt, anti-rotation features, etc). Maximum ATD head excursions in plane of the seatback were compared to previously measured roof heights of 87 different vehicles.
Results:
The roof heights in all sedan seating positions (n = 58) and SUV/CUV/minivan seating positions (n = 60) were greater than the largest maximum ATD head excursions in plane of the seatback (792 mm). Head contact was possible in two of the pickup trucks which had roof heights of 730 and 775 mm. In all, 98% of vehicle seating positions measured in this study would accommodate all of the maximum ATD head excursions in plane of the seatback without contact.
Conclusions:
The risk of head contact against the vehicle interior roof appears low as maximum ATD head excursions in plane of the seatback were typically not great enough to reach the rooflines of the vehicles in the sample. Head contact appears possible in pickup trucks, where the window/roofline is directly behind the head restraint.
Related Concept Videos
01:21Rigid Body Equilibrium Problems - II
Consider two children sitting on a seesaw, which has negligible mass. The first child has a mass (m1) of 26 kg and sits at point A, which is 1.6 meters (r1) from the pivot point B; the second child has a mass (m2) of 32 kg and sits at point C. How far from the pivot point B should the second child sit (r2) to balance the seesaw?
01:11Anatomical Positions
The body is upright, facing forward, and standing erect.
The feet are parallel and flat on the floor.
The arms are hanging by the...
01:27Cranial Bones: Lateral View
The temporal bone forms the lower lateral side of the skull. The temporal bone is subdivided into several regions. The flattened upper portion is the squamous portion of the temporal bone. Below this area and projecting anteriorly is the zygomatic process of the temporal bone, which forms the posterior portion of the zygomatic arch. Posteriorly is the mastoid portion of the temporal bone. Projecting...