Monitoring the Calibration of In-Office 3D Printers

Most desktop 3D printers lack features that allow manual calibration of printer parameters. It is crucial to assess the accuracy of printing to minimize the margin of error and variance between each print. Therefore, this study aimed to develop a method for monitoring the calibration of in-office 3D printers. A calibration coupon was designed to have a tolerance and dimensions that define nominal geometry and allow the measurement of variances occurring in X−Y axes and curvature. Ten printing cycles were run on two stereolithography (SLA) 3D printers with two different resins. Additionally, the coupons were positioned in five positions on the build platform to assess errors caused by differences in positioning. Measurements were made on the X and Y axes. No statistical difference was noted between the coupons being printed in different positions on the build platform and between the two resins at both X and Y axes of measurement (p > 0.05). Desktop 3D printers currently lack a standardized calibration protocol, which provides a closed loop for design and manufacturing of printed parts. The coupon in this study will allow monitoring the calibration of desktop 3D printers to ensure high-quality printing.