Related Experiment Video
Updated: Aug 13, 2025

Characterization of SiN Integrated Optical Phased Arrays on a Wafer-Scale Test Station
Published on: April 1, 2020
An Efficient 24-30 GHz GaN-on-Si Driver Amplifier Using Synthesized Matching Networks
Lin Peng1, Jing Yan2, Zhihao Zhang2
1School of Information Engineering, Guangdong University of Technology, Guangzhou 510006, China.
Abstract:
This paper presents a broadband GaN microwave monolithic integrated circuit driver amplifier (MMIC DA) with compact dimensions of 1.65 mm × 0.78 mm for 5G millimeter-wave communication. The optimal impedance domain satisfying the preset goals was first acquired using the simplified load-pull procedure and small-signal simulations, followed by a weighted average method to determine the reference center matching point from which the optimal intrinsic load can be deduced. By means of de-embedding load-pull contours, modeling based on theoretical analysis, and simulation fitting for parameter identification, the nonlinear output capacitance and a series RLC model circuit approximating the input impedance response of the stabilized transistor were extracted. Under the design principle of fully absorbing the parasitic parameters of the device, explicit formulas and tabulated methods related to the Chebyshev impedance transformer were applied to construct filter-based synthesized matching networks at each stage and finally convert them into an implementable mixed-element form via the single-frequency equivalence technique. Measured on-wafer pulsed results for the proposed two-stage DA across 24-30 GHz demonstrated up to 31.1 dBm of saturated output power (Psat) with less than 1 dB total fluctuation, 19.3 ± 1 dB of small-signal gain, and 39.8% of peak power-added efficiency (PAE) at the mid-frequency.
Related Concept Videos
MOSFET Amplifiers
Small-Signal Analysis of MOSFET Amplifiers
Cascaded Op Amps
In a cascaded system, each op-amp is referred to as a stage. The output of one stage drives the input of the subsequent stage. As the input signal passes through...
BJT Amplifiers
In BJT amplifier configurations, particularly in common-emitter setups, the transistor's role...
Small-Signal Analysis of BJT Amplifiers
Design Example: Vintage Mixing Console
The specifications for the pre-amplifier were clear. It needed to amplify the audio signal by a factor of 10, have an input impedance above 10...

