Optimizing the operation strategy of a combined cooling, heating and power system based on energy storage technology
Yu Zhang1, Yan Deng1, Zimin Zheng1
1School of Energy Science and Engineering, Central South University, Changsha, 410083, China.
Abstract:
Energy storage technology is the key to achieving a carbon emission policy. The purpose of the paper is to improve the overall performance of the combined cooling, heating and power-ground source heat pump (CCHP-GSHP) system by the battery. A new operation strategy (the two-point operation) is proposed by controlling the power generation unit work. The power generation unit has two operation modes of non-operation and rated efficiency operation by the storage electricity battery. The new operation strategy is compared with the traditional CCHP-GSHP that without a battery. The optimization goals include the primary energy saving ratio, the reduction ratio of carbon dioxide emissions, and the annual total cost saving ratio. The independent GSHP system is used as a reference system. Multipopulation genetic algorithms are selected to achieve the problem of optimization. A hotel building is selected for a case study. The optimal configuration of the coupling system is computed following the electric load strategy. Finally, the results show that the CCHP-GSHP system has a better performance under the new operation strategy compared with the traditional CCHP-GSHP (the primary energy saving ratio increases by 5.5%; the annual carbon dioxide emission reduction ratio increases by 1%; the annual total cost reduction ratio increases by 5.1%). This paper provides reference and suggestions for the integration and operation strategy of CCHP-GSHP in the future.
Related Concept Videos
Refrigerators and Heat Pumps
A household refrigerator removes heat from...
Fast Decoupled and DC Powerflow
Energy Stored in a Capacitor: Problem Solving
Capacitor-discharge ignition is a type of ignition system commonly found in small engines where the energy released from a capacitor ignites an induction coil that, in turn, fires the spark plug.
To calculate the energy stored in a capacitor of...
Power Factor Correction
Heating and Cooling Curves
For instance, the addition of heat raises the temperature of a solid; the amount of heat absorbed depends on the heat capacity of the solid (q = mcsolidΔT). According to thermochemistry, the relation between the amount of heat absorbed or released by a substance, q, and its...
Control of Power Flow


