Neurodynamics-based distributed model predictive control of a low-speed two-stroke marine main engine power system
Related Experiment Video
Updated: Aug 6, 2025

A Modeling and Simulation Method for Preliminary Design of an Electro-Variable Displacement Pump
Published on: June 1, 2022
Wei Zhou1, Jinhui Wu2, Andong Liu2
1Department of Automation, Zhejiang University of Technology, Hangzhou 310023, PR China; College of Marine, Zhejiang Institute of Communications, Hangzhou 311112, PR China.
Abstract:
This article studies a steady operation optimization problem of a low-speed two-stroke marine main engine (LTMME) power system including a cooling water subsystem, a fuel oil subsystem and a main engine subsystem with input and state constraints. Firstly, a distributed model with coupling inputs and states is established for the LTMME power system according to laws of thermodynamics and kinetics. Further, an optimization problem of the LTMME power system is formulated to ensure the system to operate steadily, subjected to constraint conditions of the distributed model and the input and state bounds. Moreover, the optimization problem is rewritten as a quadratic programming problem, and an iterative distributed model predictive control (DMPC) scheme based on a primal-dual neural network (PDNN) method is used to obtain the optimal inputs within the constrained range. Finally, based on the actual data from an underway ocean vessel named Mingzhou 501 with an LTMME power system, a group of simulations are carried out to verify the effectiveness of the proposed approach.
Related Concept Videos
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Multi-input and Multi-variable systems
In the absence...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
Turbine-Governor Control
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...

