Related Experiment Video
Updated: Aug 6, 2025

Author Spotlight: Fabrication of a Low-Cost, Fiber-Coupled, and Air-Spaced Fabry-Pérot Etalon
Published on: February 3, 2023
Tunable Fabry-Pérot Resonator with Dynamic Structural Color: A Visual and Ultrasensitive Hydrogen Sensor
Xiaoyi She1, Qiankun Yao1, Qiushun Zou1
1State Key Laboratory of Optoelectronic Materials and Technologies, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China.
Abstract:
Hydrogen detection is crucial for the forthcoming hydrogen economy. Here, we present a visual, ultrasensitive, optical hydrogen sensor based on a tunable Fabry-Pérot (FP) resonator, which can fully release the volume expansion of palladium during hydrogenation and transfer this volume expansion into an optical signal. The FP resonator consists of a suspended polymethylmethacrylate/palladium (PMMA/Pd) bilayer on a gold (Au) square-hole array. The bottom of the gold square hole and hydrogen-sensitive PMMA/Pd bilayer form a dynamically tunable FP resonator. When hydrogen gas (H2) is loaded, the hydrogen-induced lateral expanding stress concavely deforms the suspended bilayer downward to the substrate, narrowing the metal-air-metal gap at the center of the hole, and finally leading to a spectral blue shift. Our experimental results show a giant spectral shift of 279 nm with a reflectance variation of 57% on exposure to 0.6% H2 mixed with air. Such an ultrahigh optical response results in a significant color change, enabling visual hydrogen detection. In addition, the sensor has a H2 detection limit down to 0.1% and good recyclability. These advantages indicate that the sensor has excellent potential for hydrogen sensing applications.

