Related Experiment Video
Updated: Aug 5, 2025

Sandy Soil Improvement through Microbially Induced Calcite Precipitation MICP by Immersion
Published on: September 12, 2019
The Effect of Milled Municipal Solid Waste Incineration Bottom Ash on Cement Hydration and Mortar Properties
Jurgita Malaiškienė1, Edmundas Spudulis1, Rimvydas Stonys1
1Laboratory of Composite Materials, Faculty of Civil Engineering, Institute of Building Materials, Vilnius Gediminas Technical University, 10223 Vilnius, Lithuania.
Abstract:
Large amounts of municipal solid waste incineration bottom ash (MSWI BA) are formed worldwide, and this quantity is growing because of the establishment of new waste-to-energy plants. This waste is generally kept in landfills but can be used for the manufacturing of cementitious building materials. This article analyzes the use of MSWI BA as a microfiller in cement mortars. The effects of MSWI BA on the properties of cement binder and mortar were analyzed by using them separately or in combination with other microfillers: milled quartz sand, metakaolin, milled glass, and microsilica. This article investigates the flowability of cement-based mixtures, the volume change as a result of the evolution of hydrogen gas, cement hydration, XRD, TG, the physical and mechanical properties of the mortar samples, and leaching. The addition of milled MSWI BA in cement mortars was found to significantly increase slump flow; therefore, MSWI BA can be used as a microfiller. The addition of metakaolin changed the kinetics of H2, which evolved due to the reaction between Al and alkali, and had a positive effect on the mechanical properties of cement mortar.
More Related Videos
11:14Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
05:38Production and Analysis of Sporosarcina pasteurii Biocement Bricks Using Custom 3D-Printed Molds for Unconfined Compression Tests
Published on: March 7, 2025
Related Concept Videos
Strength and Heat of Hydration
The heat of hydration for each cement compound is significant; for instance, tricalcium aluminate (C3A) and...
Mortar Properties
Hydration of Cement
Pozzolans
Fly ash is...
Mortar
Types of Cement I
Type I (Ordinary Portland Cement) is widely used for general construction where special properties are not required. It has moderate sulfate resistance and heat of hydration.
Type II (Modified Cement) offers moderate resistance to sulfate attack and a lower rate of heat development compared to Type I. It is suitable for structures in...