Related Experiment Video
Updated: Jul 29, 2025

Author Spotlight: Simulation and Analysis of the Temperature Rise of Ring Main Unit Equipment
Published on: July 5, 2024
Research on Temperature Dependence of Single-Event Burnout in Power MOSFETs
Chen Wang1, Yi Liu1, Changqing Xu2
1Laboratory of Digital IC and Space Application, School of Microelectronics, Xidian University, Xi'an 710071, China.
Abstract:
Power MOSFETs are found to be very vulnerable to single-event burnout (SEB) in space irradiation environments, and the military components generally require that devices could operate reliably as the temperature varies from 218 K to 423 K (-55 °C to 150 °C); thus, the temperature dependence of single-event burnout (SEB) in power MOSFETs should be investigated. Our simulation results showed that the Si power MOSFETs are more tolerant to SEB at a higher temperature at the lower LET (10 MeV∙cm2/mg) due to the decrease of the impact ionization rate, which is in good agreement with the previous research. However, the state of the parasitic BJT plays a primary role in the SEB failure mechanism when the LET value is greater than 40 MeV∙cm2/mg, which exhibits a completely different temperature dependence from that of 10 MeV∙cm2/mg. Results indicate that with the temperature increasing, the lower difficulty to turn on the parasitic BJT and the increasing current gain all make it easier to build up the regenerative feedback process responsible for SEB failure. As a result, the SEB susceptibility of power MOSFETs increases as ambient temperature increases when the LET value is greater than 40 MeV∙cm2/mg.
More Related Videos
08:42In Situ Gas Analysis and Fire Characterization of Lithium-Ion Cells During Thermal Runaway Using an Environmental Chamber
Published on: March 31, 2023
11:25Identification and Quantification of Decomposition Mechanisms in Lithium-Ion Batteries; Input to Heat Flow Simulation for Modeling Thermal Runaway
Published on: March 7, 2022
Related Concept Videos
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
Characteristics of JFET
The core of a JFET's operation is controlling drain current by modulating the gate-source voltage. When the drain and gate voltage are set to zero, the JFET exhibits no net current flow, representing a state of equilibrium. The drain current increases linearly as the...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...