Related Experiment Video

Updated: Jul 27, 2025

Simulation of Human-induced Vibrations Based on the Characterized In-field Pedestrian Behavior
10:52

Simulation of Human-induced Vibrations Based on the Characterized In-field Pedestrian Behavior

Published on: April 13, 2016

8.9K

Development and Validation of a Low-Cost Device for Real-Time Detection of Fatigue Damage of Structures Subjected to

Agnese Staffa1, Massimiliano Palmieri1, Giulia Morettini1

  • 1Department of Engineering, University of Perugia, Via G. Duranti 93, 06125 Perugia, Italy.

Sensors (Basel, Switzerland)
|June 10, 2023
PubMed

Keywords:
early fault detectionreal-time fatigue damagevibration fatigue

More Related Videos

Author Spotlight: Studying Biomechanics of Circulating Cells by Modulating Their Electrodeformation Behavior09:45

Author Spotlight: Studying Biomechanics of Circulating Cells by Modulating Their Electrodeformation Behavior

Published on: October 13, 2023

1.6K
Measurement of Vibration Detection Threshold and Tactile Spatial Acuity in Human Subjects07:32

Measurement of Vibration Detection Threshold and Tactile Spatial Acuity in Human Subjects

Published on: September 1, 2016

12.8K

Related Concept Videos

Fatigue01:21

Fatigue

Fatigue occurs when materials rupture under repeated or fluctuating loads, even at stress levels far below their static breaking strength. It typically results in brittle failure, even for ductile materials. It is a critical consideration in designing machines and structural components subjected to repetitive or varying loads. The nature of these loadings can range from fluctuating loads like unbalanced pump impellers causing vibrations to repeatedly bending a thin steel rod wire back and forth...
213
Fatigue Strength of Concrete01:22

Fatigue Strength of Concrete

Fatigue, in the context of materials science and engineering, refers to the weakening or failure of a material caused by repeatedly applied loads, even if these loads are below the strength limit of the material. Fatigue strength in concrete is a critical property that influences its durability and longevity. Concrete can fail in two ways due to fatigue. Static fatigue or creep rupture occurs under a constant load or one that increases slowly. The other failure mode is due to cyclical or...
223
Non-destructive Tests for Concrete Strength01:12

Non-destructive Tests for Concrete Strength

The rebound hammer test, also known as the Schmidt hammer test, is a non-destructive technique for evaluating the hardness of concrete and, indirectly, the strength of concrete. It operates on the principle that the rebound of a spring-driven mass from a concrete surface correlates to the surface's hardness. The device comprises a mass within a tubular housing, a spring mechanism, and a plunger that strikes the concrete. Upon release, the energy imparted to the mass by the spring causes it...
151