Inulin-whey protein as efficient vehicle carrier system for chlorophyll: Optimization, characterization, and...

Natural chlorophylls mostly found in vegetables such as spinach (Spinacia oleracea) could be employed as a possible substitute for synthetic colorants because of their intense green properties. However, the stability of natural chlorophyll is a major challenge to its utilization in the food industry. In this study, spray drying as an encapsulation technique was used to improve the stability of natural chlorophyll. Box-Behnken design was utilized to optimize the spray drying conditions for chlorophyll. Optimum conditions were given as inlet temperature, 132°C; inulin-to-whey protein isolate ratio, 61%:39%; pump rate, 25%, resulting in 92.3% encapsulation efficiency, 69.4% solubility, and -13.5 mV zeta potential at a desirability level of 0.901. The particle size, Carr index, bulk and tapped density, polydispersity index, and color showed satisfactory results. Crystallinity, endothermic peak melting temperature, and the enthalpy of chlorophyll-loaded microcapsules increased when compared to the blank microcapsules suggesting decreased hygroscopicity and enhanced thermal stability. In addition, the suitability of fabricated microcapsules using yogurt as a food model was assessed. Yogurt incorporated with chlorophyll-loaded microcapsules showed no significant pH modification with better apparent viscosity than control and sodium copper chlorophyllin (SCC) yogurt after 9 days of refrigerated storage. Based on the studied responses, the spray drying process could be optimized to achieve optimal output and product quality. PRACTICAL APPLICATION: Spray drying is a cheap and convenient approach for microencapsulating bioactive compounds such as chlorophyll. However, the physico-chemical and functional properties of the spray-dried microcapsules are influenced by operating conditions, such as inlet temperature, type and concentration of wall materials, and feed flow rate. Therefore, to maximize and obtain a superior quality of the final product, there is a need to optimize the spray drying process. The Box-Behnken design employed in this study could be utilized as an appropriate technique to design, enhance, and develop process parameters for the fabrication and better retention of the physico-chemical properties of spray-dried chlorophyll microcapsules.