Related Experiment Video
Updated: Jul 17, 2025

Patterning via Optical Saturable Transitions - Fabrication and Characterization
Published on: December 11, 2014
Photoinduced Nonvolatile Displacive Transformation and Optical Switching in MnTe Semiconductors
Shunsuke Mori1, Hiroshi Tanimura2, Tetsu Ichitsubo2
1Department of Materials Science, Graduate School of Engineering, Tohoku University, 6-6-11, Aoba-yama, Aoba-ku, Sendai 980-8579, Japan.
Abstract:
MnTe is considered a promising candidate for next-generation phase change materials owing to the reversible and nonvolatile phase transformation between its α and β' phases by irradiation of a nanosecond laser or application of a pulse voltage. In this work, for a faster phase control of MnTe, the response of metastable β-MnTe thin films to femtosecond (fs) laser irradiation was investigated. Using ultrafast optical spectroscopy, we inferred transient phase transformation. Moreover, with an increase in laser-excitation fluence, a nonvolatile structural change from the β to α phase was experimentally observed by Raman spectroscopy and transmission electron microscopy without ablation damage on the sample. The observation results strongly suggest that the fs-laser-induced β → α phase transformation proceeds through the nucleation and growth mode without a large temperature increase.
More Related Videos
Related Concept Videos
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...

