Preparation and Characterization of Nano-Silver-Loaded Antibacterial Membrane via Coaxial Electrospinning

The coaxial electrospinning process has been widely used in the biomedical field, and its process parameters affect product quality seriously. In this paper, the influence of key process parameters of coaxial electrostatic spinning (solution concentration, electrospinning voltage, acceptance distance and liquid supply velocity) on the preparation of a membrane with Chitosan, Polyethylene oxide and nano-silver as the core layer and Polycaprolactone as the shell layer was studied. The optimal combination of key process parameters was obtained by using an orthogonal test, scanning electron microscope, transmission electron microscope and macro-characterization diagram. The results showed that the coaxial electrospun membrane had good mechanical properties (tensile strength is about 2.945 Mpa), hydrophilicity (the water contact angle is about 72.28°) and non-cytotoxicity, which was conducive to cell adhesion and proliferation. The coaxial electrospun membrane with nano-silver has an obvious inhibitory effect on Escherichia coli and Staphylococcus aureus. In summary, the coaxial electrospun membrane that we produced is expected to be used in clinical medicine, such as vascular stent membranes and bionic blood vessels.