Distribution of select per- and polyfluoroalkyl substances at a chemical manufacturing plant
Brian A Schumacher1, John H Zimmerman2, Alan C Williams2
1US EPA Office of Research and Development (ORD), Center for Environmental Measurement & Modeling, 960 College Station Road, Athens, GA 30605, USA.
Abstract:
Per- and polyfluoroalkyl substances (PFAS) are used in various industrial products; however, they pose serious health risks. In this study, soil, soil gas, and groundwater samples were collected at a PFAS manufacturing facility in New Jersey, USA, to determine the presence and distribution of PFASs from the soil surface to groundwater and at various distances from the presumed source. Fluorotelomer alcohols (FTOHs) were detected in soil (< 0.26-36.15 ng/g) and soil gas (160-12,000 E µg/m3), while perfluorinated carboxylic acids (PFCAs) were found in soil (4.3-810 ng/g), soil gas (<0.10-180 µg/m3), and groundwater (37-49 µg/L). FTOH and PFCA concentrations decreased as the distance from the presumed source increased, suggesting that PFCAs are likely to migrate in groundwater, whereas FTOHs primarily move in the vapor phase. The presence of PFAS in the groundwater, soil, and soil gas samples indicate its potential for vapor intrusion; thus, some PFAS may contribute to indoor air inhalation exposure. To the best of our knowledge, this is the first report on the quantification of volatile PFAS in soil gas at a PFAS manufacturing facility.
More Related Videos
Related Concept Videos
Design Example: Aggregate Gradation
The grading, or particle-size distribution, of sand is determined using sieve analysis, with standard sizes ranging from 150 μm to 10 mm (ASTM No. 100 sieve to 3⁄8 in. sieve). Sand is...
Bioreactor Design and Operational System
Methods of Medium Optimization
Scale-Up Processes
Upstream Processing


