Sulfonate-Containing Polyelectrolytes for Perovskite Modification: Chemical Configuration, Property, and Performance

Three sulfonate-containing polyelectrolytes are elaborately designed and used to passivate perovskite film with the anti-solvent method. Under the influence of the secondary monomer, three copolymers present various chemical configurations and deliver different modification effects. Fluorene-thiophene copolymer STF has linear and highly-conjugated chain. STF-perovskite film presents large crystal grains. Fluorene-carbazole copolymer SCF has flexible chain and easily enters into grain boundary areas. SCF-perovskite film is homogenous and continuous. Fluorene-fluorene copolymer SPF agglomerates on the surface and is not applicable to the anti-solvent method. The full investigation demonstrates that STF and SCF not only conduct surface defect passivation, but also improve the film quality by being involved in the perovskite's crystallization process. Compared with the control device, the devices with STF and SCF deliver high efficiency and excellent stability. The unencapsulated devices with STF and SCT maintain ≈80% of the initial power conversion efficiency (PCE) after 40 days of storage under 30-40% relative humidity. SCF performs better and the device maintains 60% of the initial PCE after 20 days of storage under 60-80% relative humidity.