A 77 GHz Power Amplifier with 19.1 dBm Peak Output Power in 130 nm SiGe Process

This article reports a two-stage differential structure power amplifier based on a 130 nm SiGe process operating at 77 GHz. By introducing a tunable capacitor for amplitude and phase balance at the center tap of the secondary coil of the traditional Marchand balun, the balun achieves amplitude imbalance less than 0.5 dB and phase imbalance less than 1 degree within the operating frequency range of 70-85 GHz, which enables the power amplifier to exhibit comparable output power over a wide operating frequency band. The power amplifier, based on a designed 3-bit digital analog convertor (DAC)-controlled base bias current source, exhibits small signal gain fluctuation of less than 5 dB and saturation output power fluctuation of less than 2 dB near the 80 GHz frequency point when the ambient temperature varies in the range of -40 °C to 125 °C. Benefiting from the aforementioned design, the tested single-path differential power amplifier exhibits a small signal gain exceeding 16 dB, a saturation output power exceeding 18 dBm, and a peak saturation output power of 19.1 dBm in the frequency band of 70-85 GHz.