Related Experiment Video
Updated: Jul 2, 2025

Fabrication and Characterization of Superconducting Resonators
Published on: May 21, 2016
Optimal Excitation and Readout of Resonators Used as Wireless Passive Sensors
Leonhard M Reindl1, Taimur Aftab1, Gunnar Gidion1
1Laboratory for Electrical Instrumentation and Embedded Systems, Faculty of Engineering, University of Freiburg, 79110 Freiburg, Germany.
Abstract:
Resonators are passive time-invariant components that do not produce a frequency shift. However, they respond to an excitation signal close to resonance with an oscillation at their natural frequencies with exponentially decreasing amplitudes. If resonators are connected to antennas, they form purely passive sensors that can be read remotely. In this work, we model the external excitation of a resonator with different excitation signals and its subsequent decay characteristics analytically as well as numerically. The analytical modeling explains the properties of the resonator during transient response and decay behavior. The analytical modeling clarifies how natural oscillations are generated in a linear time-invariant system, even if their spectrum was not included in the stimulation spectrum. In addition, it enables the readout signals to be optimized in terms of duration and bandwidth.
Related Concept Videos
Parallel Resonance
Characteristics of Series Resonant Circuit
Design Example: Underdamped Parallel RLC Circuit
Starting with a fixed...
Concept of Resonance and its Characteristics
Double Resonance Techniques: Overview
Spin decoupling is usually achieved by...
Series Resonance

