The Influence of Graphite Filler on the Self-Lubricating Properties of Epoxy Composites

In this work, epoxy composites filled with flake graphite of various size (less than 10 μm and less than 45 μm) were produced. The aim of the research was to develop a self-lubricating material with favorable tribological properties, i.e., reduced friction coefficient compared to unfilled epoxy resin and limited abrasive wear. The research material was produced using technical epoxy resins based on bisphenol A. The detailed process of composite production was described, and typical technological problems were considered. The addition of graphite led to an increase in dynamic viscosity, which positively limits the phenomenon of sedimentation, but an increase in the filler content also led to an increase in the porosity of the material. A series of tests have shown that the addition of graphite above 5% by weight allows for a reduction in the friction coefficient from 0.6 to 0.4 and significantly reduces the material's tendency to abrasive wear.