Design of an actuator with bionic claw hook-suction cup hybrid structure for soft robot

To improve the adaptability of soft robots to the environment and achieve reliable attachment on various surfaces such as smooth and rough, this study draws inspiration from the collaborative attachment strategy of insects, cats, and other biological claw hooks and foot pads, and designs an actuator with a bionic claw hook-suction cup hybrid structure. The rigid biomimetic pop-up claw hook linkage mechanism is combined with a flexible suction cup of a 'foot pad' to achieve a synergistic adhesion effect between claw hook locking and suction cup adhesion through the deformation control of a soft pneumatic actuator. A pop-up claw hook linkage mechanism based on the principle of cat claw movement was designed, and the attachment mechanism of the biological claw hooks and footpads was analysed. An artificial muscle-spring-reinforced flexible pneumatic actuator (SRFPA) was developed and a kinematic model of the SRFPA was established and analysed using Abaqus. Finally, a prototype of the hybrid actuator was fabricated. The kinematic and mechanical performances of the SRFPA and entire actuator were characterised, and the attachment performance of the hybrid actuator to smooth and rough surfaces was tested. The results indicate that the proposed biomimetic claw hook-suction cup hybrid structure actuator is effective for various types of surface adhesion, object grasping, and robot walking. This study provides new insights for the design of highly adaptable robots and biomimetic attachment devices.